KWASAR

Physical Magnitudes and Unit Conversions

Theory · Catalog · SI Prefixes · Converter · Quiz · Test · Education

What is a physical magnitude?

A physical magnitude is any property of a body or phenomenon that can be measured and expressed by a number and a unit.

For example: 3 m, 25 °C, 72 km/h. A number without a unit says nothing physically.

Fundamental vs derived

The International System (SI) defines 7 fundamental magnitudes, independent of each other. All the others are derived: they are obtained by combining the fundamental ones through products or quotients.

You can see the complete catalog in the Magnitudes tab.

The 7 fundamental SI magnitudes

MagnitudeUnitSymbolDimension
LengthmetremL
MasskilogramkgM
TimesecondsT
Electric currentampereAI
TemperaturekelvinKΘ
Amount of substancemolemolN
Luminous intensitycandelacdJ

What is a dimension?

The dimension describes what a magnitude is made of in terms of the fundamental ones, regardless of the specific unit. It is written in brackets.

For example, speed is measured in m/s, km/h or mph, but it always has dimension L/T (length over time). No matter the unit: the dimension does not change.

The 7 fundamental dimensions

MagnitudeDimensionRead as
LengthLel
MassMem
TimeTtee
Electric currentIeye
TemperatureΘtheta
Amount of substanceNen
Luminous intensityJjay

Examples of derived dimensions

Velocity = L / T = [L·T⁻¹] Acceleration = L / T² = [L·T⁻²] Force = M · L / T² = [M·L·T⁻²] Energy = M · L² / T² = [M·L²·T⁻²] Pressure = M / (L·T²) = [M·L⁻¹·T⁻²] Density = M / L³ = [M·L⁻³]

What is dimension analysis useful for?

  • Checking whether an equation is coherent: both sides must have the same dimension. If not, something is wrong.
  • Detecting errors: if a sum shows m + m/s, you know it's wrong without doing the calculation.
  • Switching between unit systems without memorising all the factors.
  • Guessing how a phenomenon scales: area grows as L², volume as L³.

Magnitude catalog

Each magnitude with its description, dimension, SI unit and other common units.

SI prefixes (complete)

They allow writing very large or very small quantities without filling the page with zeros. They are placed before the unit: 1 km = 1000 m, 1 mm = 0.001 m.

The last four (quetta/quecto and ronna/ronto) were added in 2022 to cover the extremes.

PrefixSymbolPower
quettaQ10³⁰
ronnaR10²⁷
yottaY10²⁴
zettaZ10²¹
exaE10¹⁸
petaP10¹⁵
teraT10¹²
gigaG10⁹
megaM10⁶
kilok10³
hectoh10²
decada10¹
— base unit (10⁰ = 1) —
decid10⁻¹
centic10⁻²
millim10⁻³
microµ10⁻⁶
nanon10⁻⁹
picop10⁻¹²
femtof10⁻¹⁵
attoa10⁻¹⁸
zeptoz10⁻²¹
yoctoy10⁻²⁴
rontor10⁻²⁷
quectoq10⁻³⁰

Unit converter

Choose a magnitude, enter the value and select units. The result updates instantly.

→

Scientific notation converter (bidirectional)

Type in either field and the other updates automatically. Accepts comma or dot, and notation such as 1e-5, 4.2e-4, 4.2×10⁻⁴, 4.2*10^-4.

⇄
Accepted equivalences: 4.2×10⁻⁴ · 4.2 x 10^-4 · 4.2e-4 · 42×10⁻⁵

Example 1 · Length

Convert 25 km to metres.

Factor: 1 km = 1000 m

25 km × (1000 m / 1 km) = 25,000 m

The km unit cancels out and m remains.

Example 2 · Speed

Convert 72 km/h to m/s.

Factors: 1 km = 1000 m  ·  1 h = 3600 s

72 km/h × (1000 m / 1 km) × (1 h / 3600 s) = 20 m/s

Example 3 · Temperature

Convert 25 °C to °F.

Formula: °F = °C × 9/5 + 32

°F = 25 × 1.8 + 32 = 45 + 32 = 77 °F

Temperature is not converted by multiplying: their scales do not share the same zero.

Mini-quiz

20 random questions (6 fixed + 14 from the pool). Select and press Check.

Magnitude test

Rounds of 5 random questions (~380 questions in the pool). Immediate feedback per question. Informative timer, no time limit.

Press «Start test» to begin
⏱ 00:00

📚 Education · Learn physics the easy way

Review the key concepts of magnitudes, units and conversions with examples, history and curious anecdotes. Designed for secondary school students.

🎯 A. What is measuring?

Measuring means comparing a quantity with an established standard. For example, measuring a table with a ruler compares its length with the length of the ruler (the standard).

For that comparison to make sense, everyone must use the same standard. That is where the International System of Units (SI) comes from. Without common standards, the same object would measure differently depending on who measured it.

History: Before the SI, every region had its own units. A "cubit" in Egypt was not the same as a "cubit" in Rome. This caused problems in trade and science. In 1875, 17 countries signed the Metre Convention to unify measurements.
Magnitude
The property being measured. E.g.: length, mass, time.
Quantity
The specific value. E.g.: 3 metres, 5 kg, 10 seconds.
Unit
The reference standard. E.g.: metre (m), kilogram (kg), second (s).
📜 B. History of the International System

The SI has evolved for more than 200 years. Each fundamental unit has a fascinating story:

The metre

It was born in 1791 as one ten-millionth of the Earth's meridian between the North Pole and the equator (passing through Paris). It was materialised in a platinum-iridium bar in 1889. In 1983 it was redefined definitively: it is the distance light travels in vacuum in 1/299,792,458 of a second.

The kilogram

Until 2019 it was defined by a platinum-iridium cylinder kept in Sèvres (France), the "Big K". The problem: it slowly lost weight (30 micrograms in 100 years). In 2019 it was redefined with the Planck constant.

The second

It used to be 1/86400 of a solar day. But the Earth does not rotate at a constant speed. Since 1967 it is defined by the oscillation of the caesium-133 atom: 9,192,631,770 oscillations per second.

Anecdote: On 23 September 1999, the Mars Climate Orbiter space probe (125 million dollars) crashed into Mars. The cause: one team used pound-force and another used newtons. Nobody converted the units.
Curiosity: The USA signed the Metre Convention in 1875, but to this day it still uses feet, inches, miles and pounds in everyday life. In science and engineering it does use the SI.
📏 C. The 7 fundamental magnitudes, one by one

1. Length (metre, m)

It measures the distance between two points. A sheet of paper is ~0.1 mm thick. The distance from the Earth to the Sun is 1.5×10¹¹ m. The distance to the nearest star (Proxima Centauri) is 4.2 light-years, about 4×10¹⁶ m.

2. Mass (kilogram, kg)

It measures the amount of matter. Careful: mass does NOT change with gravity, weight does. A 70 kg astronaut has the same mass on the Moon, but there weighs 6 times less.

3. Time (second, s)

It measures the duration of events. Current atomic clocks lose 1 second every 15 billion years. A lightning bolt takes ~30 microseconds to discharge.

4. Electric current (ampere, A)

It measures the flow of electric charge. A small LED uses 20 mA. A fast phone charger, 3 A. A lightning bolt can carry 30,000 A for milliseconds.

5. Temperature (kelvin, K)

It measures the average kinetic energy of particles. Absolute zero (0 K = -273.15 °C) is the point where (theoretically) nothing moves. The highest temperature recorded on Earth has been ~57 °C; in the Sun, ~15 million °C at the core.

6. Amount of substance (mole)

It measures the number of elementary entities (atoms, molecules, ions). 1 mole = 6.022×10²³ particles. It is the "Avogadro number". It is used to count atoms without having to count them one by one.

7. Luminous intensity (candela, cd)

It measures the luminous flux emitted by a source in a direction. A candle emits approximately 1 cd. A typical household LED, 50–100 cd.

🔤 D. SI prefixes: why they exist

Prefixes allow writing very large or very small quantities without filling the page with zeros. Without them, the Earth-Sun distance would be:

150,000,000,000 m → better: 150×10⁹ m → better: 150 Gm → better: 0.15 Tm

Each prefix multiplies or divides by powers of 1000 (except the smallest, which go in steps of 1000).

Curious etymology

  • micro (µ): from Greek mikros = "small"
  • nano (n): from Greek nanos = "dwarf"
  • tera (T): from Greek teras = "monster"
  • peta (P): from Greek pente = "five" (because 10¹⁵ = 1000⁵)
  • exa (E): from Greek hex = "six"
  • yotta (Y): from Latin octo = "eight"

How much is a yottabyte?

10²⁴ bytes. To give you an idea: the volume of all the water in Earth's oceans is 1.3×10²¹ litres. A yottalitre would be nearly 1000 times more than all the oceans together.

Curiosity: The prefix hecto (h = 100) has almost disappeared. It only survives in "hectare" and "hectolitre". Nobody says "hectometre" in everyday life.
🔬 E. Scientific notation

Scientific notation is a way of writing very large or very small numbers using powers of 10. It always has the form:

a × 10ⁿ   where   1 ≤ |a| < 10   and   n is an integer

Rules

  • If the number is greater than 10 → positive exponent. E.g.: 3,500,000 = 3.5×10⁶.
  • If the number is between 0 and 1 → negative exponent. E.g.: 0.00042 = 4.2×10⁻⁴.
  • When multiplying, exponents add: (2×10³)·(3×10⁴) = 6×10⁷.
  • When dividing, exponents subtract: (8×10⁹)/(2×10³) = 4×10⁶.

Everyday examples

Proton mass
1.67×10⁻²⁷ kg
Distance to the Sun
1.5×10¹¹ m
Speed of light
3×10⁸ m/s
Atom diameter
1×10⁻¹⁰ m
Avogadro number
6.022×10²³
World population
~8×10⁹

In the Converter tab you have a bidirectional converter that goes from number to notation and back.

⚠️ F. Errors and significant figures

When we measure, we do not obtain the "exact" value but an approximation with a certain precision. Significant figures indicate how many digits of a measurement are reliable.

Basic rules

  • Non-zero digits: always significant. 3.42 → 3 figures.
  • Zeros between non-zero digits: significant. 1002 → 4 figures.
  • Leading zeros: not significant. 0.0042 → 2 figures.
  • Trailing zeros without a decimal point: ambiguous. 100 may have 1 or 3 figures.

How to round the result?

In a multiplication or division, the result cannot have more significant figures than the factor with the fewest figures.

2.5 × 3.42 = 8.55 → reported as 8.6 (2 figures, like 2.5)

In an addition or subtraction, the result is rounded to the least precise decimal of the addends.

12.345 + 1.2 = 13.545 → reported as 13.5
Trick: It is better to keep 2-3 extra figures during intermediate calculations and round only at the end. If you round at every step, the error accumulates.
🎭 G. Curious anecdotes about units

The Gimli Glider

On 23 July 1983, a Boeing 767 of Air Canada ran out of fuel at 12,000 metres altitude. The cause: when refuelling, pounds were confused with kilograms (1 kg = 2.2 lb). The plane needed 22,300 kg and was given 22,300 lb (10,100 kg). The pilot managed to glide for 20 minutes and land at an old military base. No casualties.

The barn

It is a unit of area used in nuclear physics: 1 barn = 10⁻²⁸ m². Its name comes from the English word "barn" (granary). During World War II, scientists called it that as code because it sounded like "a barn" to describe the cross-section of an atomic nucleus: "it's as big as a barn".

The furlong

1 furlong = 201.168 m. It is the length of a plough furrow pulled by an ox. It is still used in horse racing in the UK and Ireland.

The light-year

It is not a unit of time, it is of distance! It is what light takes to travel during a year: ~9.46×10¹² km. Sunlight takes 8 minutes to reach the Earth.

The kilogram and the Big K

Until 2019, the kilogram was defined by a platinum-iridium cylinder kept in a vault in Sèvres. But the "Big K" slowly lost mass, and that made the world mass standard change! The solution was to redefine it with the Planck constant.

The nautical mile

1 nautical mile = 1852 m exactly. It equals 1 minute of arc of Earth's latitude. That is why navigators use it: navigating 60 nautical miles north equals 1 degree of latitude.

🏠 H. Where is physics used in everyday life?

In your phone

  • Battery: measured in mAh (milliampere-hour), not in joules. A typical phone has 4,000 mAh.
  • Screen: brightness is measured in cd/m² (nits). A typical phone, 500 nits. Ambient light, in lux.
  • Processor: speed in GHz. Power in W.
  • GPS: works thanks to relativity (Einstein). Without relativistic corrections, the error would be 10 km/day.

In the kitchen

  • Oven: temperature in °C.
  • Microwave: power in W (typically 800 W).
  • Recipes: mass in g, volume in mL. A cup is ~250 mL!
  • Calories: 1 kcal = 4184 J. An adult needs ~2000 kcal/day.

In sports

  • Speed: km/h or m/s. Bolt ran at 44.72 km/h = 12.42 m/s.
  • Acceleration: an F1 car reaches 5 g when braking.
  • Energy: the calories burned at the gym are in kcal.

In medicine

  • Radiation dose: gray (Gy) = J/kg.
  • Radioactivity: becquerel (Bq) = 1 disintegration/s.
  • Blood pressure: mmHg (millimetres of mercury).
  • Drug concentration: mg/dL or mM.

In weather

  • Atmospheric pressure: hPa (hectopascals) = mbar. Standard pressure is 1013 hPa.
  • Wind: km/h on land, knots (kn) at sea.
  • Temperature: °C in Europe, °F in the USA.

Common mistakes

Confusing mass with weight.
→ Mass is in kg; weight is a force and is in N.
Converting temperature by multiplying.
→ °C, °F, K and °R need formulas (their zeros do not match).
Operating with different units without converting.
→ 2 m + 30 cm → 2 m + 0.3 m = 2.3 m.
Getting prefixes wrong.
→ k = 10³ (1000), not 100. M = 10⁶. c = 10⁻².
Forgetting to square or cube.
→ 1 m = 100 cm → 1 m² = 10,000 cm² (not 100) → 1 m³ = 1,000,000 cm³.
Rounding too early.
→ Keep more figures during calculations and round only at the end. Significant figures: 2.5 × 3.42 = 8.55, but reported as 8.6 (2 figures, like 2.5).
Writing compound units incorrectly.
→ m/s, km/h, not mps or kmh.
📌 Notice: this tool is an educational and professional aid. Conversion factors, prefixes and definitions follow the International System (SI) according to the 27th General Conference on Weights and Measures (2022). Results are indicative: for critical applications, always cross-check with current regulations and the manufacturer's datasheet.

⚖️ Disclaimer

The contents of this tool (theory, magnitude catalog, prefixes, converter, scientific notation, quiz, test and education section) are informational and educational. Conversion factors and definitions have been prepared from public sources (BIPM, NIST, RAE, secondary school textbooks) and are reviewed periodically, but may contain errors or omissions.

Conversion results are indicative. For critical applications (engineering, medicine, pharmacy, precision chemistry, instrument calibration) the use of official tables, calibrated instruments and validation by a qualified professional is required.

KWASAR is not responsible for direct or indirect damages arising from the use of this tool. The user assumes responsibility for the practical application of the results.